Post your latest progression.

A hopefully fun stone ,stropping compounds lapping films etc thread.

I'll start it.[Image: 2a978a41315183eeab7c90b5359a2e2d.jpg]

Stones above are.
Green stone is a Chosera/Naniwa Professional series 1,000 grit.
Other green stone is a Wakasa Japanese natural.
Large DMT8C plate.
One Extra Fine dmt card for slurry.
One dmt 325 card for initial slurry.


Sent from my SCH-I545 using Tapatalk

[Image: 9106b341dd70384799df3dcd837934fa.jpg] DMT8C and a Chosera 1k.
[Image: 42b3abf80524079b5755fdd66a002ea7.jpg] Shapton professional stone 5k.
[Image: da95b335b06a61970c67047bb4c01c9a.jpg] Shapton professional stone 8k.
[Image: 781e50a1bc5d6913cfde87cb40a59323.jpg] Naniwa super stone 12k.
The razor was a Genco fluid steel.

The job was to remove a serious frown and micro chips. Cheers. -cam-

Sent from my SCH-I545 using Tapatalk

I haven't seen the DMT cards before. I'll have to look around for one. I usually use my DMT325 for slurry but I like the idea of the small cards. Perhaps a small handle could be glued or soldered onto the back of it.

I haven't seen the DMT cards before. I'll have to look around for one. I usually use my DMT325 for slurry but I like the idea of the small cards. Perhaps a small handle could be glued or soldered onto the back of it.

That is done ,it works better.

Sent from my SCH-I545 using Tapatalk

[Image: 7f39053192b9e885c1c6d76d6694b63c.jpg] DMT8C and a Chosera 1k. Union cutlery spike.

Sent from my SCH-I545 using Tapatalk

[Image: 635a30a521e598a8508516fd45c61664.jpg] DMT8C and a Chosera 1k. Union cutlery spike.
[Image: 4f6cfb63e3443ee7cf8835be4c63e716.jpg] Shapton professional stone 5k.
[Image: 3387db979ec1eb067b453d68bc3b94e0.jpg] Shapton professional stone 8k.
[Image: 70c64d082582304c8dea892bb566ff03.jpg] Ozuku finishing hone with nagura slurry for the finish.

Sent from my SCH-I545 using Tapatalk

[Image: a9875508ea2ab91db90a41b179e767a6.jpg] at the bottom, DMT lapping plate. Green chosera 1k, green shapton professional 8k, pink shapton professional 5k,white/cream naniwa 12k . Cheers.

Sent from my SCH-I545 using Tapatalk

[Image: d01dacb5f0124b6b0a6411c52f0570c8.jpg] Shapton professional 5k stone.
Shobu Japanese natural.

[Image: e5aa53acde614c03ce4962ed61184e10.jpg]
[Image: 5e1e87f763fb7a624fca759fe2b756f8.jpg]
Equal grind kamisori.
[Image: 2091c996a35350d6ad5bd89b88da9fa0.jpg] very nice 6/8th's plus new old stock kamisori. Cheers.

Sent from my SCH-I545 using Tapatalk

[Image: ca51b42ce8fb82b7a8f949c0de457c08.jpg] A refresh on the Eisemann. Ozuku koppa and a 9 micron dmt card for the slurry.

Sent from my SCH-I545 using Tapatalk

[Image: ee522bfe3320323c46dbfb9b235bc12d.jpg] A ebay rehone tonight. An old Jordan 5/8th's plus needed rust honed past. This was the order.
Taped the spine,DMT8C to remove the chips and rotten metal. Tape removed for the Naniwa Professional series 1,000 grit ( green synthetic) then to the Shapton professional series 5k ( pink box) next the little DMT 45 micron card to raise a heavy slurry on the green Wakasa (jnat) . Finished out on a slurry from the DMT 9 micron card on the Wakasa koppa.

[Image: e7fe5c893a8f4a654b91b8aef7f217d3.jpg]

Sent from my SCH-I545 using Tapatalk