Rockwell model T

We would all love to have a CNC milled Fatboy modern tool. Why not start a Kickstarter - I am sure you can sell at $150 a piece and you'll find it up for grabs!

I asked him (the machine shop owner) about this and he has no interest in it. He makes a lot more money doing other work. As for the custom razor, he tossed it. He prefers the Schick 5 blade cartridges.  

As for me, Nah. There are enough great quality razors out there.

LOL I'm sorry man but I have to call you out on this one, tell me which one are you: a troll, a shill or a professional bullshitter?

Concur. This is not in the realm of possibility. And if it is please send me the name / address of machine shop - I’ll fly there this week and personally commission this razor to go into production at this pricing.


Sent from my iPhone using Tapatalk

I asked him (the machine shop owner) about this and he has no interest in it. He makes a lot more money doing other work. As for the custom razor, he tossed it. He prefers the Schick 5 blade cartridges.  

As for me, Nah. There are enough great quality razors out there.

LOL I'm sorry man but I have to call you out on this one, tell me which one are you: a troll, a shill or a professional bullshitter?

Concur. This is not in the realm of possibility. And if it is please send me the name / address of machine shop - I’ll fly there this week and personally commission this razor to go into production at this pricing.


Sent from my iPhone using Tapatalk

We can smell turd a mile away Matt, there are no ifs or buts the guy is smoke and mirrors no doubt. I would be pleasantly surprised if you decide to part take on all SS 316L adjustable TTO design but it will be a challenge. Maybe work on one in 3D plastic print just to get to play with it a bit and if all is well run a prototype in aluminum before going full SS. If all turns out well do the final prototype in SS and then its time to run another GB and recoup the R&D and make some profit.

I know its easy to say than to achieve

New update. Hmmm.

New Campaign Update!

The Rockwell Model T Razor & Blades: Shaving Perfected team just posted.

SEE PAST UPDATES
ASK A QUESTION
VIEW ORDER STATUS



posted by Gareth Everard

Jun 4, 2018 • 5:47AM PDT
May Update - One-Piece T-Bar & Shipping Progress

Dear Backers,

We’re thrilled to be sharing the progress we’ve made over the last month in correcting the concerns we identified in our last update. We’re working diligently on getting the One-Piece T-Bar solution up and running, so we’ll address that in this update but otherwise endeavor to keep the update short and sweet!

Assembly and shipping has continued this past month, and we’re certainly seeing that our additional care with the current 2-piece T-Bar assemblies is paying dividends through backers reporting exceptional shaves, with razors exhibiting fantastic blade gaps and symmetry.

One-Piece T-Bar

After a test production of the One-Piece T-Bar that met the required tolerances, we’re optimistic about the results of our One-Piece T-Bar test mass production, which we expect to have results on in early June. Pictures of the successful test production of the One-Piece T-Bar are below!

As mentioned last month, in parallel we are producing a new batch of two-piece T-Bar Heads with a larger diameter in the critical point - this is a design that works and that our manufacturing partner can produce reliably. Once that production is complete, we’re expecting to be able to ramp up the assembly speed for the remaining Model T razors.

Through June, we will continue to ship White Chrome razors that meet the specifications outlined in the April Update. We’re still expecting that the updated Two-Piece T-Bar and brand new One-Piece T-Bar productions will complete in July and we can fulfill Indiegogo pledges towards the end of August, 2018. We can’t wait to read or watch your reviews as you continue to receive your pledge rewards, and we’re thrilled that so many backers have specifically mentioned that the Model T was absolutely worth the wait!

As always, thank you for all your ongoing support,

The Rockwell Razors Team
Posted By
What's your reaction to this post?
Your feedback will help Gareth Everard improve future updates.
This is awesome! Thanks for sharing I'd like more info.
You are receiving this email because you have contributed to or are following this campaign. To stop receiving updates from this campaign, change the settings in your email_preferences

New update. Hmmm.

New Campaign Update!

The Rockwell Model T Razor & Blades: Shaving Perfected team just posted.

SEE PAST UPDATES
ASK A QUESTION
VIEW ORDER STATUS



posted by Gareth Everard

Jun 4, 2018 • 5:47AM PDT
May Update - One-Piece T-Bar & Shipping Progress

Dear Backers,

We’re thrilled to be sharing the progress we’ve made over the last month in correcting the concerns we identified in our last update. We’re working diligently on getting the One-Piece T-Bar solution up and running, so we’ll address that in this update but otherwise endeavor to keep the update short and sweet!

Assembly and shipping has continued this past month, and we’re certainly seeing that our additional care with the current 2-piece T-Bar assemblies is paying dividends through backers reporting exceptional shaves, with razors exhibiting fantastic blade gaps and symmetry.

One-Piece T-Bar

After a test production of the One-Piece T-Bar that met the required tolerances, we’re optimistic about the results of our One-Piece T-Bar test mass production, which we expect to have results on in early June. Pictures of the successful test production of the One-Piece T-Bar are below!

As mentioned last month, in parallel we are producing a new batch of two-piece T-Bar Heads with a larger diameter in the critical point - this is a design that works and that our manufacturing partner can produce reliably. Once that production is complete, we’re expecting to be able to ramp up the assembly speed for the remaining Model T razors.

Through June, we will continue to ship White Chrome razors that meet the specifications outlined in the April Update. We’re still expecting that the updated Two-Piece T-Bar and brand new One-Piece T-Bar productions will complete in July and we can fulfill Indiegogo pledges towards the end of August, 2018. We can’t wait to read or watch your reviews as you continue to receive your pledge rewards, and we’re thrilled that so many backers have specifically mentioned that the Model T was absolutely worth the wait!

As always, thank you for all your ongoing support,

The Rockwell Razors Team
Posted By
What's your reaction to this post?
Your feedback will help Gareth Everard improve future updates.
This is awesome! Thanks for sharing I'd like more info.
You are receiving this email because you have contributed to or are following this campaign. To stop receiving updates from this campaign, change the settings in your email_preferences

Drum roll...... The new improved Teeeeeeewwe bar ... TADA!!

Sent from my MI MAX using Tapatalk

So I guess they are going to be shipping models with both styles of T-bars the one piece and the two piece

So I guess they are going to be shipping models with both styles of T-bars the one piece and the two piece

Only the two piece T-bars that passed their inspection and they determined not to cause a problem. If I was getting a Model T I would insist I get the one piece. But then again, we don't know if the one piece will solve their problems.

So I guess they are going to be shipping models with both styles of T-bars the one piece and the two piece

Only the two piece T-bars that passed their inspection and they determined not to cause a problem. If I was getting a Model T I would insist I get the one piece. But then again, we don't know if the one piece will solve their problems.

I totally agree with you on that.

Also you can see the 2 piece that the t-bar is zinc and the rod is brass, the new 1 piece t-bar in no doubt will be all zinc. No matter what we have to give them props, these dudes are not giving up and to be honest i like that! They just have to make sure the 1 piece t-bar gets good quality plating for the sake of longevity of the razor. I left the ks long time a go, but i like what im seeing from from them, these dudes are commited on delivering the razor in proper order

Also you can see the 2 piece that the t-bar is zinc and the rod is brass, the new 1 piece t-bar in no doubt will be all zinc. No matter what we have to give them props, these dudes are not giving up and to be honest i like that! They just have to make sure the 1 piece t-bar gets good quality plating for the sake of longevity of the razor. I left the ks long time a go, but i like what im seeing from from them, these dudes are commited on delivering the razor in proper order

I have always read that the T bar was SS and assume that this could be SS as well but they haven't specified as well as it seems that such a complex 3D one piece would be difficult to make in SS unless they use MIM which as a process has worked for them. I'll be putting up this question to the team.

Sent from my MI MAX using Tapatalk

So I guess they are going to be shipping models with both styles of T-bars the one piece and the two piece

Only the two piece T-bars that passed their inspection and they determined not to cause a problem. If I was getting a Model T I would insist I get the one piece. But then again, we don't know if the one piece will solve their problems.

I totally agree with you on that.

Going by their track record with the other razors they would just reach out and send a replacement of there are complaints. I assume they would continue that policy. I would like it that way unless it was a full SS razor which would be an expensive replacement !

Sent from my MI MAX using Tapatalk