#781
The last few posts have been enlightening. Thanks for that gents.

So what is the gap and exposure on the new Ti Dbk?

So, aggression fits where on say on the Karve A through Karve E plate. Just ballpark as I am trying to gauge if this fits my predilections.

Thx in advance boys.

Sent from my SM-A536U using Tapatalk

Calm_Shaver likes this post
#782

Member
Spain
(This post was last modified: 04-17-2024, 12:06 AM by macroincensi. Edited 3 times in total.)
Titanium version is more mild than the stainless steel one, a lot more in my experience. I would say it's very close to the Charcoal Goods Lvl 1. Overall medium efficiency, greater for the stainless steel. Imho. I know each of us has his own experience, but calling this razor medium or even aggressive is more like to have just a very poor technique. It's pretty much impossible to cut yourself and the blade feel is almost inexistent.

TommyCarioca This Ti is close to the Karve C in my opinion.

Calm_Shaver and TommyCarioca like this post
#783
(04-17-2024, 12:00 AM)macroincensi Wrote: Titanium version is more mild than the stainless steel one, a lot more in my experience. I would say it's very close to the Charcoal Goods Lvl 1. Overall medium efficiency, greater for the stainless steel. Imho. I know each of us has his own experience, but calling this razor medium or even aggressive is more like to have just a very poor technique. It's pretty much impossible to cut yourself and the blade feel is almost inexistent.

TommyCarioca This Ti is close to the Karve C in my opinion.
Right on. Thanks bigley. Karve B and C are my sweetspot!

Sent from my SM-A536U using Tapatalk

Calm_Shaver likes this post
#784

Living on the edge
(This post was last modified: 04-17-2024, 07:32 AM by Tester28. Edited 1 time in total.)
(04-16-2024, 10:31 PM)TommyCarioca Wrote: So what is the gap and exposure on the new Ti Dbk?

Was published in the original DB thread...said to be around 0.80mm
Exposure sllllllightly above neutral.

Calm_Shaver and TommyCarioca like this post
#785

Living on the edge
(This post was last modified: 04-17-2024, 07:34 AM by Tester28. Edited 1 time in total.)
(04-17-2024, 12:00 AM)macroincensi Wrote: Titanium version is more mild than the stainless steel one, a lot more in my experience. I would say it's very close to the Charcoal Goods Lvl 1.

That sounds plausible...it certainly feels less aggressive than a LVL 2. Never used LVL 1 so can't tell.
But it goes a very close shave as many can testify

Calm_Shaver, Laborking and TommyCarioca like this post
#786
The Eagle Has Landed Smile to be precise, 2 eagles Smile

[Image: zTGG7Lh.jpg]
[Image: CjAUMpR.jpg]
[Image: YdIFGYh.jpg]

Arsene Wenger, GlazedBoker, HOLYZEUS and 9 others like this post
#787
(04-16-2024, 01:52 PM)TommyCarioca Wrote: I am very curious if there is even one shaver or there that find this tool too agressive or too mild?

There appears to be a iron clasd concensus that this is the THE razor.

I will get in line to buy one in SS - but could this be true?

The PERFECT razor has been built?

Still know idea of exposure and gap.?

Analog Razor? I prefer MILD razors. Any thoughts out there?

Had some great input from Sasco and Neroli. Thanks boys.



Sent from my SM-A536U using Tapatalk

I have refrained from commenting on this razor, but since you asked, I didn't care for it. The Ti DB was in and out of my den pretty quick. If I was a daily or every other day shaver, it would be a different story. I expect my razors to remove 3 to 10 days of growth at a time....like a squeegee...on the first pass. I want constant, no question blade feel. I want at least a 10-12 hour BBS. I want to shave today and be able to attend a meeting tomorrow and still be relatively clean. On the off chance I shave two consecutive days, this razor would work, but it would not replace my Athena in that roll.

I understand I am a minority, in more ways than one. The Ti DB was not designed for guys like me. It was designed to appeal to 90% of the community. In that regard, it hit the mark. The razor is quite handsome though.

dtownvino, AQU, Sascoman and 5 others like this post
#788
(04-17-2024, 01:11 PM)LOOT Wrote:
(04-16-2024, 01:52 PM)TommyCarioca Wrote: I am very curious if there is even one shaver or there that find this tool too agressive or too mild?

There appears to be a iron clasd concensus that this is the THE razor.

I will get in line to buy one in SS - but could this be true?

The PERFECT razor has been built?

Still know idea of exposure and gap.?

Analog Razor? I prefer MILD razors. Any thoughts out there?

Had some great input from Sasco and Neroli. Thanks boys.



Sent from my SM-A536U using Tapatalk

I have refrained from commenting on this razor, but since you asked, I didn't care for it. The Ti DB was in and out of my den pretty quick. If I was a daily or every other day shaver, it would be a different story. I expect my razors to remove 3 to 10 days of growth at a time....like a squeegee...on the first pass. I want constant, no question blade feel. I want at least a 10-12 hour BBS. I want to shave today and be able to attend a meeting tomorrow and still be relatively clean. On the off chance I shave two consecutive days, this razor would work, but it would not replace my Athena in that roll.

I understand I am a minority, in more ways than one. The Ti DB was not designed for guys like me. It was designed to appeal to 90% of the community. In that regard, it hit the mark. The razor is quite handsome though.
Gracias!

Sent from my SM-A536U using Tapatalk
#789
(04-17-2024, 07:30 AM)Tester28 Wrote:
(04-16-2024, 10:31 PM)TommyCarioca Wrote: So what is the gap and exposure on the new Ti Dbk?

Was published in the original DB thread...said to be around 0.80mm
Exposure sllllllightly above neutral.
Big thanks.

Sent from my SM-A536U using Tapatalk
#790
(This post was last modified: 04-17-2024, 09:52 PM by Southsider. Edited 1 time in total.)
(04-16-2024, 02:07 PM)george1906 Wrote:
(04-16-2024, 01:52 PM)TommyCarioca Wrote: I am very curious if there is even one shaver or there that find this tool too agressive or too mild? 

There appears to be a iron clasd concensus that this is the THE razor.

I will get in line to buy one in SS - but could this be true?

The PERFECT razor has been built?

Still know idea of exposure and gap.?

Analog Razor?  I prefer MILD razors. Any thoughts out there? 

Had some great input from Sasco and Neroli. Thanks boys.



Sent from my SM-A536U using Tapatalk


I don’t think this is the end all to be all razor.  I need to get a couple more shaves in with the titanium version but after my first shave, I prefer the my stainless version.  That is just my opinion and the reason is because I prefer more aggressive razors and the SS version has more blade feel because of the weight.  The Diamondback in both metals is a STELLAR razor but, for me, not the best ever!  Keep in mind, I own a ton of high end razors so it is going up against a lot for me.


Sent from my iPhone using Tapatalk
george1906, I am curious as to which razor takes your top spot.  I presently have a slight preference for my 2020 Diamondback over the Titanium version but for me this is really splitting hairs (no pun intended).  As you note, both are stellar.

TommyCarioca After reading a number of your posts regarding your preference in razors, I suspect that the Titanium Dback is right up your alley.  I too like a relatively mild razor in a SB configuration.  For me, the Ti Dback is smooth and mild feeling, yet efficient.  As a comparison, when I use my Karve (one of the original brass ones) I like to use A, B and C from my collection of plates AA through F, all SB.  When I use my Timeless Ti razor, I usually choose .68 SB over my .95 SB.

TommyCarioca and AQU like this post


Users browsing this thread: 4 Guest(s)