#271

Elite Razor
Roswell, GA
I have just listed the brush shown below and it is available on my site at www.eliterazor.com.

Fire and Ice (24mm)
[Image: nchVtIU.jpg]

As always, thanks for looking.

Bob

mr. smith likes this post
Bob Quinn

Elite Razor
www.eliterazor.com

EliteRazorshaving on Instagram
#272

Elite Razor
Roswell, GA
I finished up a very nice brush this morning and it has been listed and is available on my site at www.eliterazor.com.

Black Ash Burl - 24mm

Black Ash burl is native to the Great Lakes and Acadia regions of North America.  The wood of black ash is strongly ring-porous, making it ideal for basketry splint, barrel hoops, snowshoe frames, canoe ribs, and material for woven chair seats.  It is darker colored with more grain and used largely for furniture and interior finish.  Black ash is an important tree for the making of lacrosse sticks used by the Mohawk and other tribes of the Eastern United States.  The inner bark of the black ash was used to make a bark barrel by the Iroquois which was made for storing dried vegetables, fruits, and seeds, as well as clothing. The tree traditionally was a valuable medicine to many tribes in Eastern North America.

[Image: vZszpfo.jpg]

As always, thanks for looking.

Bob

mr. smith likes this post
Bob Quinn

Elite Razor
www.eliterazor.com

EliteRazorshaving on Instagram
#273

Elite Razor
Roswell, GA
The brush shown below is made of Afzelia burl.  This is a very rare wood with exceptional grain.  This brush has just been listed on my site at www.eliterazor.com.

I will be out of town from 6/27 - 7/7.  Any order placed during this time will be shipped upon my return.  Please stop my and take a look, I have many beautiful brushes and razors available.  I will have internet access while out of town, so let me know if you have any questions.

Afzelia Burl - 24mm
[Image: H92ITKB.jpg]

As always, thanks for looking.

Bob

mr. smith likes this post
Bob Quinn

Elite Razor
www.eliterazor.com

EliteRazorshaving on Instagram
#274

Elite Razor
Roswell, GA
This beautiful example of the Mokume-Gane fusion of Cobalt and Carbon is off to its new home.  I don't turn this material very often due to the increased cost, but the results are always amazing.

 Mokume-Gane (pronounced Moe-koo-may Gah-nay) is the ancient Japanese metal working technique where layers of contrasting color metals such as copper, brass, nickel silver, gold, and silver are fusion welded with very high heat and pressure into one solid block of metal.  Traditional Mokume-Gane is extremely rare and sells for hundreds, if not thousands, of dollars for a very small quantity.  The name “Mokume Gane” refers to the visual appearance of a pattern in metal approximating that of wood. “Mokume” literally means “wood eye”, which would be used to describe a highly figured wood grain. “Gane” translates as metal. So, in English, “wood grain metal” is a near-literal translation.

[Image: tUEbrRh.jpg][Image: c9SWo4n.jpg]

As always, thanks for looking.

Bob

Deus Vult, george1906, Viking and 2 others like this post
Bob Quinn

Elite Razor
www.eliterazor.com

EliteRazorshaving on Instagram
#275

Elite Razor
Roswell, GA
(This post was last modified: 07-22-2019, 09:08 PM by Bob Quinn.)
I just dropped the following new pieces into my site at www.eliterazor.com.

Mokume-Gane Cobalt and Carbon - 26mm
[Image: XgjKR2P.jpg]

Gold Laced Onyx - 26mm
[Image: QkhtAIF.jpg]

Brown Chestnut and Gold - 26mm
[Image: u5nrn2f.jpg]

Malachite - (26 - 28mm)
[Image: uor0ABI.jpg]

Malachite Razor handle from the same block as the brush
[Image: XV51drN.jpg]

Bloody Basin Jasper - 26mm
[Image: 5cDtnQR.jpg]

Walnut Burl - 24mm
[Image: sRhrb18.jpg]

Walnut Burl razor handle from the same block.
[Image: rHJavoH.jpg]

As always, thanks for looking.

Bob

Matsilainen likes this post
Bob Quinn

Elite Razor
www.eliterazor.com

EliteRazorshaving on Instagram
#276

Member
Las Vegas, NV, USA
Some absolutely beautiful creations there, Bob Quinn!

mr. smith likes this post
Whenever I go to shave, I assume there’s someone else on the planet shaving, so I say “I’m gonna go shave, too.”
– Mitch Hedberg
#277

Elite Razor
Roswell, GA
(07-24-2019, 01:34 AM)Matsilainen Wrote: Some absolutely beautiful creations there, Bob Quinn!

Thank you.

Matsilainen likes this post
Bob Quinn

Elite Razor
www.eliterazor.com

EliteRazorshaving on Instagram
#278

Elite Razor
Roswell, GA
I had some time to finish up the last of the "Gold Flake" brushes that I had previously poured.  Shown below are the newest additions to my site.

Emerald Pearl and Gold (26mm)
[Image: ATOzRtV.jpg]

Indigo Blue and Gold - (26mm)
[Image: QANCTiV.jpg]

I also had the opportunity to complete a new Amber brush.

Speckled Amber (26mm)
[Image: ESE0nre.jpg]

As always, thanks for looking.

Bob

HoosierShave, Matsilainen and FloridaCreekIndian like this post
Bob Quinn

Elite Razor
www.eliterazor.com

EliteRazorshaving on Instagram
#279

Elite Razor
Roswell, GA
Every once in a while, you stand behind the lathe with no preconceived idea of what to turn.  This happens more frequently to some of us than others, but that's another topic entirely.  I began turning the brush below with no goal in sight and let my tools just work their way around the piece.  When the dust settled, the handle shown below was the result.  It is very well suited to host a Fan shaped knot and, to my eye, it has a bit of a Buck Rogers vibe to it.  (If you don't know who Buck Rogers is, ask your Grandparents.  Even if you do recognize the name, call your Grandparents anyway, they'd love to hear from you.)

Any comments about the shape would be greatly appreciated.

Gold, Red and Blue - 26mm
[Image: 2hqC1AS.jpg]

As always, thanks for looking.

Bob

Watson, FloridaCreekIndian and Matsilainen like this post
Bob Quinn

Elite Razor
www.eliterazor.com

EliteRazorshaving on Instagram
#280
absolutely gorgeous!  you should make that shape again.


Users browsing this thread: 1 Guest(s)