Elite Razor - Custom and Unique Razors and Brushes

I finished a couple of new brushes this morning and they are now listed and available on my site at www.eliterazor.com.

All are shown with a 24mm knot, but can be adjusted to accept a 26mm knot, if you prefer.

Opaque Green Pearl over a translucent Emerald Green base


Burnt Purpleheart - Passing a torch over this handle really brought out the Deep Purple.... listen closely and you can almost hear the opening of Smoke On The Water.


Buckeye Burl with a fiery red resin


As always, thanks for looking.

Bob

I've just completed three new brushes that are now listed and available on my site at www.eliterazor.com

Fire and Ice


Blue Pearl with Gold Flakes


Mardi Gras


As always, thanks for looking.

Bob

These brushes are all from a series of custom pours and feature semi-transparent bottom sections that really show off the depth of the resin.  These beauties are currently listed and available on my site at www.eliterazor.com

Blue on blue - Shown with a 24mm knot, but may be adjusted to accept a 26mm knot.


Copper on blue - Shown with a 24mm knot, but may be adjusted to accept a 26mm knot.


Crimson Red - 28mm


As always, thanks for looking.

Bob

This brush just came out of the shop this morning.  It is Ivory with a transparent blue band and is shown with a 26mm knot.  It is listed and available on my site at www.eliterazor.com.



As always, thanks for looking.

Bob

I just completed the brush shown below.  It is made of Wild Horse Jasper, which is associated with the birthstone month of January.  Wild Horse Jasper is named for the location where it is mined, at the Wild Horse Canyon in Oregon. The name is Greek in origin, meaning “spotted or speckled stone” and Jasper was a favorite gemstone of ancient times and can be traced back to Greek, Hebrew, Persian, Latin, and Assyrian literature.  In mythology, Jasper is said to have powers to keep evil and fatal insect or reptile bites at bay.  This particularly handsome Wild Horse Jasper stone is prized for its' crimson and jet black veins.

I received the Elite Razor medallions yesterday and this is the first piece I have ever branded.

This brush is listed and available at www.eliterazor.com





As always, thanks for looking,

Bob

I'm always looking for something that is a little different that I can use to make razor or brush handles.  I came across this gentleman who uses small pieces of hand-hammered metal to individually place around a brass tube then encase the whole thing in clear resin.  I am pleased to have acquired a few of his pieces to turn into razor handles.  Each is definitely "one of a kind".

These have all been listed on my site at www.eliterazor.com and are available as a 3-piece handle only or a complete razor with either a Muhle, Edwin Jagger or Merkur head.










As always, thanks for looking,

Bob

I completed a couple of new brushes today.  They are both listed and available on my site at www.eliterazor.com.

Gold Laced Onyx - This brush is available with either a 24mm knot (as shown) or with a 26mm knot.


Dark Brown Swirls in a transparent Amber resin - 24mm


As always, thanks for looking.

Bob

I've been wanting to build a Barber Pole brush for quite a while. I finally got to it and I'm pretty pleased with the results. It is shown with a 24mm knot, but can be opened up to accept a 26mm knot.



As always, thanks for looking.

Bob

I have completed a couple of new brushes as shown below.  They are all listed and available at www.eliterazor.com.

Barber Pole


Ocean Waves Resin and Burl


Two Tone Amboyna Burl


As always, thanks for looking.

Bob

I just completed a couple of new brushes that can also be paired with a matching razor handle.  These are from a custom pour and are in the Fire and Ice coloring and one was built with the Fire over the Ice and the other with the Ice over the Fire.  The razor handles can be fitted to match either color combination as a 3-piece handle only to fit your existing head, a finished 3-piece razor with either a Merkur, Edwin Jagger or Muhle head or fit to a Merkur HD razor.

Ice over Fire - 28mm knot


Fire over Ice - 24 or 26mm knot


Long Handle


Short Handle


I was also recently asked if I could build a brush that represented the colors of the Italian flag.  Overall, it turned out pretty well.




All these pieces have just been listed on my site at www.eliterazor.com

As always, thanks for looking.

Bob