#731

Just Here for the Shaves
Williamsburg, KY
(02-10-2021, 06:12 PM)MaineYooper Wrote: Glad to hear you are prepared. Best decision we made when building our house was to get talked into getting a generator. If it's not an ice or wind storm causing an outage, it's someone taking out a utility pole.

Just a small portable propane unit but it does the necessities. I have the propane fireplace for supplemental heat so don't need a big unit.

AQU, MaineYooper and HighSpeed like this post
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin
#732

Just Here for the Shaves
Williamsburg, KY
Thursday February 11, 2021
Razor: Blackland Sabre
Blade: Gem (3)
Brush: Rubberset 400/Oumo Boar
Soap: Lakewood SOCP (1508.5 Project on Steroids)
AS 1: Humphrey's Alcoholado Maravilla 70
AS 2: Ethos Fresh Lime
Fragrance: Viktor and Rolf Spicebomb

Had another shave with the 1508.5 project which will continue at least 5 times a week giving me 1-2 breaks a week until gone.........it's getting closer but you know how hard it is to tell. These rings seem to regenerate overnight and grow more soap. I'm thinking it's easier to sell/Pif some to reduce the den size than to feel the need to focus on 1 at a time like this and missing out on the variety I have accumulated and want to use when desired..............Clearly I will need to take stock of the soap portion of the den and make some decisions. The Sabre did it's job and the stiff Gem blade takes no prisoners. It just eliminates the enemy stubble. Have a great day Guys/Gals !!

[Image: scSNGPw.jpg]

MaineYooper and HighSpeed like this post
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin
#733

Just Here for the Shaves
Williamsburg, KY
FINALLY got to trying to get this 400 polished and maybe should have waited until I got a detail dremel tool rather than using my RotoZip with an attachment.................. It grabbed and scarred it in a few places. Good enough for now but may sand them later when I calm down from being mad at myself for rushing it........
Before Pics for Reminder
[Image: VwXTULm.jpg]
[Image: lral6Wl.jpg]
[Image: nwuLR5A.jpg]
After Pics showing shine progress and scars
[Image: 5fEo7Yn.jpg]
[Image: NCMZra3.jpg]
[Image: XqDcQVc.jpg]

MilkCrate, MaineYooper and Stubble Daddy like this post
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin
#734

Scentsless Shaver
Oakland, ME
looks good!
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!
#735
That 400 is looking good. Man I dig those brushes. How is your mixed knot holding up?

I’ve been doing the PIF thing with a few soaps also. Just doing them behind the scenes based on posts made by users. It’s helped thin things a bit.

Dave in KY and keto like this post
-Tim

-Another satisfied Fluffy Industries customer - V2 Mini Copper.
-Proud member of Club Oscuro - Trotter Handcrafts Costa Oscuro.
#736

Just Here for the Shaves
Williamsburg, KY
(02-11-2021, 06:15 PM)MilkCrate Wrote: That 400 is looking good. Man I dig those brushes. How is your mixed knot holding up?

I’ve been doing the PIF thing with a few soaps also. Just doing them behind the scenes based on posts made by users. It’s helped thin things a bit.

Thanks Tim, Mixed knot went with that anniversary brush to someone that bought a lot from me.

MilkCrate likes this post
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin
#737
(02-11-2021, 06:26 PM)Dave in KY Wrote:
(02-11-2021, 06:15 PM)MilkCrate Wrote: That 400 is looking good. Man I dig those brushes. How is your mixed knot holding up?

I’ve been doing the PIF thing with a few soaps also. Just doing them behind the scenes based on posts made by users. It’s helped thin things a bit.

Thanks Tim, Mixed knot went with that anniversary brush to someone that bought a lot from me.

So you weren’t keen in the mixed knot?
-Tim

-Another satisfied Fluffy Industries customer - V2 Mini Copper.
-Proud member of Club Oscuro - Trotter Handcrafts Costa Oscuro.
#738

Just Here for the Shaves
Williamsburg, KY
(02-11-2021, 06:59 PM)MilkCrate Wrote:
(02-11-2021, 06:26 PM)Dave in KY Wrote:
(02-11-2021, 06:15 PM)MilkCrate Wrote: That 400 is looking good. Man I dig those brushes. How is your mixed knot holding up?

I’ve been doing the PIF thing with a few soaps also. Just doing them behind the scenes based on posts made by users. It’s helped thin things a bit.

Thanks Tim, Mixed knot went with that anniversary brush to someone that bought a lot from me.

So you weren’t keen in the mixed knot?

Was taking forever to break in. I should have pulled it out and kept it but truthfully I was so ticked off at the 3 Hypocrites that I wanted EVERYTHING associated with them and their dictatorial forum GONE.
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin
#739
(02-11-2021, 07:35 PM)Dave in KY Wrote:
(02-11-2021, 06:59 PM)MilkCrate Wrote:
(02-11-2021, 06:26 PM)Dave in KY Wrote: Thanks Tim, Mixed knot went with that anniversary brush to someone that bought a lot from me.

So you weren’t keen in the mixed knot?

Was taking forever to break in. I should have pulled it out and kept it but truthfully I was so ticked off at the 3 Hypocrites that I wanted EVERYTHING associated with them and their dictatorial forum GONE.

Larry, Moe and Curley Joe?

Dave in KY and HighSpeed like this post
#740

Just Here for the Shaves
Williamsburg, KY
(This post was last modified: 02-12-2021, 01:26 AM by Dave in KY.)
(02-11-2021, 11:28 PM)Southsider Wrote:
(02-11-2021, 07:35 PM)Dave in KY Wrote:
(02-11-2021, 06:59 PM)MilkCrate Wrote: So you weren’t keen in the mixed knot?

Was taking forever to break in. I should have pulled it out and kept it but truthfully I was so ticked off at the 3 Hypocrites that I wanted EVERYTHING associated with them and their dictatorial forum GONE.

Larry, Moe and Curley Joe?

Mr Ego, The Lush and The Follower  Cool
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin


Users browsing this thread: metal_shavings, 1 Guest(s)