#2,501

Scentsless Shaver
Oakland, ME
The big nor'easter is looking like it will miss us! Which is fine by me, as I saw my first bunch of robins (flock? herd? passel?) and I always worry about them when they show up this early. Actually, this is probably the earliest I've ever seen them. But Maine Audubon says not to worry, they know what they're doing! If only I did, ha ha!! Big Grin

I have taken a couple of days off this week, so I plan to get the Christmas decorations down and stored today. Just kidding. Big stuff is down but I missed the fireplace; got too used to seeing the stockings hung with care. (Waiting for Santa's after Christmas clearance trip!  Tongue )

Shaves have been fun lately. Since DecemBoar, I've gotten away from any sort of fixed four and have been enjoying the variety of options I have for every shave. It is a definite attraction and so fun to revisit a razor without feeling locked in. I find this interesting as the big reason I went to a weekly set up was to not worry about what I'd use the next day. On some days I'd realize instead of enjoying the shave I was thinking about what to use the next day. And constant switching seemed to affect my learning. I am happy to say that now I seem to be able to switch anything out and shave with confidence, ha ha. Not that other times were with no confidence, but instead I would go into a new week's setup planning on the first shave not being great as I figured I needed to get in the groove with that new setup. Funny how 10 years ago I just saw the whole thing as a chore and didn't really give two hoots about anything other than trying to get as many tug-free shaves as I could out of each cartridge.

Today was the Fatboy set to 5, a vintage Rite Aid Personna PtCr blade, Canada Shaving Soap, and an APSC Independent fan in the Trotter Quasar handle. A wonderful shave! This iteration of the Fatboy (1958) is the smoothest of the 4 fatboys I have had. Others seemed chunky, clunky, and harsh feeling, even at lower settings. I got this one off the BST, and it had been cleaned, tuned, and replated by Chris at BRG, and is now one of my favorite razors. It is similar to the one my Dad bought himself when he left home for teaching college, to go to UW-Stevens Point in the fall of '58.  Happy2

TheBurgh, Dave in KY, GoodShave and 4 others like this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!
#2,502

Just Here for the Shaves
Williamsburg, KY
(This post was last modified: 02-13-2024, 08:01 PM by Dave in KY.)
Great talk of your strategy and what it accomplished Eric Happy2

MaineYooper and HighSpeed like this post
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin
#2,503

Scentsless Shaver
Oakland, ME
Thursday 2/15/24

[Image: WJvjRza.jpg]

Enders Speed Shaver
Schick Proline B-20 (2) and the mild adapter from HC&C
Muhle STF XL knot in Trotter Supernova
Canada Shaving Soap

HighSpeed, Dave in KY, mrdoug and 2 others like this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!
#2,504

Scentsless Shaver
Oakland, ME
(This post was last modified: 02-17-2024, 08:55 PM by MaineYooper. Edit Reason: name of handle color )
Friday, February 16, 2024

[Image: IuYN9Uz.jpg]

A new brush moved into the brush drawer yesterday, a Wald Nimbus with an A1 fan. Many thanks to the member here that was willing to part with this brush so that I could have it  Smile This is the Deep Sea Wave color pattern.

Like it's smaller sibling, the Calyx, this brush feels fantastic to the face. To me, it's like a Cashmere knot but so much for dense and so soft. I am amazed that so dense a knot isn't pokey or stiff, but instead feels amazingly soft. I am learning to lather it, and did pretty well this morning, but I started too dry and then went too wet! (Similar to how my wife says I season food: either too little or too much!) But I look forward to learning how to do it right with whatever soap I am using!

Other gear: Stirling Sheep, Tatara Masamune, Tatara Platinum blade (6).

Here's to a great weekend for us all!

HighSpeed, Dave in KY, ewk and 1 others like this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!
#2,505

Just Here for the Shaves
Williamsburg, KY
Stink, I was hoping for a negative review to save my wallet......Congrats on a gorgeous brush and setup !

HighSpeed and MaineYooper like this post
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin
#2,506

Scentsless Shaver
Oakland, ME
(02-16-2024, 05:55 PM)Dave in KY Wrote: Stink, I was hoping for a negative review to save my wallet......Congrats on a gorgeous brush and setup !

I did have to think about it, and finally decided to post a WTB rather than figure out the ordering process. And my instant gratification was pleased as once I sent money, the brush was on its way, no 4 week wait, ha ha! My fall back plan was to place an order at the end of the month for the color/handle I wanted, but a member here had one of my preferences! We do have some great folks here!

Negative review notes: Some find the handles odd shapes off-putting, and I can say I don't care for the look of the "reverse keyhole" handle, but I have never held one so I am speaking through my hat on that. The knot loads differently, preferring not to be soaking wet. But I have followed Leisure Guy's method of starting drying and tip dipping as I go for almost all my knots, so I know that I can adjust to this knot's preferred lathering.

My last negative is that this one and the Calyx could cause a brush purge, like the Overlander did with my razors. We'll see, but I already am thinking that between these and the new Muhle STF knot, I may need to let some other synths and lesser used badgers go. Especially since my wife was rooting around my side looking for more shampoo and seemed astounded, and not in a good way, ha ha, at all the brushes!!

ewk, HighSpeed, Dave in KY and 1 others like this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!
#2,507

Just Here for the Shaves
Williamsburg, KY
(02-16-2024, 06:14 PM)MaineYooper Wrote:
(02-16-2024, 05:55 PM)Dave in KY Wrote: Stink, I was hoping for a negative review to save my wallet......Congrats on a gorgeous brush and setup !
Especially since my wife was rooting around my side looking for more shampoo and seemed astounded, and not in a good way, ha ha, at all the brushes!!

Happy
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin
#2,508
(This post was last modified: 02-16-2024, 06:19 PM by ewk.)
Based on your experience and sale of a few razors, my Calyx just cleared US Customs at 11:15 this morning. Do you notice a difference in the two knots, the Calyx being 2mm smaller? (Please say they are exactly the same)

MaineYooper and HighSpeed like this post
#2,509

Member
gone to Carolina in my mind
Congratulations Eric.  Your Wald is a beauty!

Hey Dave in KY:  Resistance is futile?

ewk, Dave in KY and MaineYooper like this post
Technique Trumps Tools
Skin Care Trumps Skin Repair

Be Cool, be Kind, and be Well
--  Mike --
#2,510

Scentsless Shaver
Oakland, ME
(02-16-2024, 06:19 PM)ewk Wrote: Based on your experience and sale of a few razors, my Calyx just cleared US Customs at 11:15 this morning. Do you notice a difference in the two knots, the Calyx being 2mm smaller? (Please say they are exactly the same)

Hey Eric,

I can honestly say that I didn't notice any difference! There most likely is, if I were to use both at the same time, but after this morning's shave, I'd say the only difference I noted was the feel of the handle. The knot itself doesn't look huge, which at 29mm it should, in my opinion. And that is the same for the Calyx. It is 27mm, also a fan, and looks about 24mm. The Nimbus looks between 24mm and 26mm to my untrained eye and felt smaller than my 25mm Muhle STF knot. This is most likely due to how other knots that I have splay so much. 

The Calyx was my first, bought here from a member who didn't like it. The handle style worried me, as I wasn't sure what to think of vertical ridges when I am used to smooth handles, but I was pleasantly surprised to how "normal" it felt in my hand. I liked it enough to have an internal debate with myself on whether I should get the Nimbus in the color pattern I liked best. I strongly expect that you'll be more than happy with it!

ewk and HighSpeed like this post
- Eric 
Put your message in a modem, 
And throw it in the Cyber Sea
--Rush, "Virtuality"

Overloader of brushes, Overlander fanboy, Schickhead, and a GEM in the rough!


Users browsing this thread: 2 Guest(s)