#1

Administrator
Philadelphia, PA
For a long time in my old bathroom before we renovated it, we didn't have a drain stop in the sink (the old one literally rusted into 2 pieces) so rarely did my bathroom sink get clogged...

Since getting our bathroom remodeled, we have a new sink and faucet with the drain stop installed. I seem to be plunging the sink every few weeks or so now so it'll drain normally.

I shave both around my beard line and my head...

I'm thinking of removing the drain stop and just installing a mesh strainer.

What does everyone else do to prevent this problem?

Sent from my SM-G998U using Tapatalk

Brains, ALI and DanLaw like this post
Tu ne cede malis, sed contra audentior ito.
#2

Just Here for the Shaves
Williamsburg, KY
If too many loose boar/badger hairs get caught and collect soap I just clean it occasionally but it is easy on mine.
https://youtu.be/bxYUIhpj97Y

DanLaw, ALI and andrewjs18 like this post
This post by Dave in KY mentions views and opinions expressed and makes it known that they are "those of the author and do not necessarily reflect the official policy or position of DFS or any other member, agency, organization, employer or company."  Big Grin
#3
I regularly drop a small spoonful of baking soda in the sink with a few squirts of vinegar and then pour a kettle of hot water. Never had a problem with clogging or odours coming up through the pipes. Baking soda is simply fantastic for so many things even cooking.

MaineYooper, DanLaw, ALI and 1 others like this post

                                                                                                            

                                                                                                                                                                                 
#4

Member
Seattle
I installed these see-through p-traps in all of the sinks in our house. I purchased this 18 years ago when we did a kitchen and bath re-model, and I have only had to replace one over that period (the inside mechanism seal wore out from lots of use). They work great to clean out the gunk, since the p-trap has a crank to turn a drain wiper inside! I have used the vinegar baking soda method, as well as pouring Coke down the drain...and you can actually see the drain get cleaned. The price has gone up about 25%, but they are worth every penny.
Here is the name of the p-trap and Manufacturer website. It is available on Amazon or at many retailers. They are around $20 to $22 at Home Depot and Lowes.
Name: Permaflow Transparent No Clog Drain P-Trap Easy Install for Kitchen & Bath Sinks
Manufacturer Site: http://www.pfwaterworks.com/product-perma-flow.html

andrewjs18, DanLaw and ALI like this post
#5

Administrator
Philadelphia, PA
(02-20-2023, 10:31 AM)Captainjonny Wrote: I installed these see-through p-traps in all of the sinks in our house.  I purchased this 18 years ago when we did a kitchen and bath re-model, and I have only had to replace one over that period (the inside mechanism seal wore out from lots of use).  They work great to clean out the gunk, since the p-trap has a crank to turn a drain wiper inside!  I have used the vinegar baking soda method, as well as pouring Coke down the drain...and you can actually see the drain get cleaned.  The price has gone up about 25%, but they are worth every penny.
Here is the name of the p-trap and Manufacturer website.  It is available on Amazon or at many retailers.  They are around $20 to $22 at Home Depot and Lowes.
Name:  Permaflow Transparent No Clog Drain P-Trap Easy Install for Kitchen & Bath Sinks
Manufacturer Site:  http://www.pfwaterworks.com/product-perma-flow.html

that's pretty interesting!

DanLaw likes this post
Tu ne cede malis, sed contra audentior ito.
#6

Living on the edge
The sludge that shaving creates is truly staggering. What I do is pour a dose
of drain unclogging solution down, leave it for about half an hour and then pour
boiling water down the hatch.

Keeps things flowing normally.


Users browsing this thread: 1 Guest(s)