#21
(This post was last modified: 07-11-2020, 04:55 PM by BBS.)
(07-04-2020, 07:11 PM)Alex7 Wrote: I've also been told to never use vinegar on a safety razor. What do you guys think?

If you want to remove the plating then use vinegar or anything acidic.

For cleaning warm water and dish soap wash and scrub with a toothbrush. Try not to use boiling water since it can distort the shape of certain metals and especially plastic parts.

To sanitize scrubbing bubbles, lysol concentrate or isopropyl alcohol let soak for about 10 minutes. That will kill most anything. As long as the razor isn't rusting bacteria and germs don't survive longer than about 48 hours on metal as long as it is dry. The exception is silver or silver plate water is what activates it's antimicrobial properties. If you have one plated in silver, sanitizing is by and large not necessary, it will self sanitize if you wet the razor and leave it that way for a little bit before using.

If the razor is showing signs of staining or staining on the blades due to plating loss and/or a galvanic reaction also going on with the blade and razor head you need to starve the surfaces of the electrolyte to break the reaction. After each shave shake off the excess water and dip the razor head in isopropyl alcohol to remove any excess moisture and store normally. Unless the air is too humid it should be enough to break the reaction. You can also use it to sanitize after each use. If not then store the razor head submerged instead in the isopropyl alcohol between uses.

ALI likes this post
#22
(06-25-2020, 11:18 PM)Blackland Razors Wrote: Assuming these are razors you already own and use, I think you're overdoing it. Razors really don't need to be cleaned that often or that extensively. A rinse and maybe a wipe with a towel after every shave. For actual cleaning, dish soap and a soft cloth/towel is all you'll need 99% of the time. Avoid abrasives like toothpaste or polishes unless you really need it. For what it's worth, I almost never really deep clean my personal razors. Maybe 2-4 times a year will they get the soap treatment.
I pull the blade out after every shave, wipe the razor off with a microfiber towel/rag and q-tip free threads. Honestly my razors are decades old and look brand new. But i do this after every shave. The only time consuming action is i wipe the blade off once worth the same micro fiber towel and cork the edges. I have no idea if this does anything but the blade look 'sho do loik goot' before i shave with it again [a Lil bit OCD and old man habit].

Sent from my SM-G955U using Tapatalk
#23
(This post was last modified: 07-19-2020, 11:19 PM by keto.)
Yep, hot water rinse, take the razor apart and dry good with a micro fiber cloth. I'll let it stay apart for hours at least.

TommyCarioca likes this post
#24
PAA brush cleaning soap


Users browsing this thread: 1 Guest(s)